Items where Subject is "Area 09 - Ingegneria industriale e dell'informazione > ING-IND/21 METALLURGIA"

Group by: Creators | Defended on
Jump to: C | D | E | F | L | M | P | S | T | V | X | Z
Number of items at this level: 21.

C

Cazzolli, Marco (2015) Co-sintering of a metal injection overmolded bi-metallic part. PhD thesis, University of Trento.

Cipolloni, Giulia (2016) Production of strengthened copper materials by Mechanical Milling-Mechanical Alloying and Spark Plasma Sintering. PhD thesis, University of Trento.

Corsentino, Nicolò (2016) Development of a design procedure accounting for the anisotropy of the dimensional change in Powder Metallurgy parts. PhD thesis, University of Trento.

D

de Oliveira Botelho, Pedro Augusto (2015) Biodegradable stents made of pure Mg and AZ91 alloy through SPS sintering. PhD thesis, University of Trento.

Deirmina, Faraz (2017) Novel PM Tool Steel with improved hardness and toughness. PhD thesis, University of Trento.

Diouf, Saliou (2013) Production of a nanostructured copper by Spark Plasma Sintering. PhD thesis, University of Trento.

E

Emanuelli, Lorena (2018) Study of the properties of cemented carbides from industrial production. PhD thesis, University of Trento.

Eslami, Maryam (2019) Surface Treatments to Protect Conventional and Rheo-High Pressure Die Cast Al-Si Alloys from Corrosion. PhD thesis, University of Trento.

F

Facchini, Luca (2010) Microstructure and mechanical properties of biomedical alloys produced by Rapid Manufacturing techniques. PhD thesis, University of Trento.

Federici, Matteo (2019) Study of Wear Mechanisms in Braking Systems with HVOF-Coated Discs. PhD thesis, University of Trento.

Fedrizzi, Anna (2013) Production of steel matrix composites by mechanical milling and spark plasma sintering. PhD thesis, University of Trento.

L

Labiscsak, Laszlo (2012) Numerical simulation of fumes evacuation in steelmaking plants. PhD thesis, University of Trento.

Lonardelli, Ivan (2010) Deformation mechanisms in bulk nanostructured aluminum obtained after cryomilling and consolidation by spark plasma sintering. PhD thesis, University of Trento.

M

Mekonone, Samuel Tesfaye (2018) Theoretical analysis and experimental investigation of contact fatigue and surface damage in prealloyed and diffusion bonded sintered steels. PhD thesis, University of Trento.

P

Perez Demydenko, Camilo (2019) Static and dynamic disorder in nanocrystalline materials. PhD thesis, University of Trento.

Pilla, Melania (2013) Effect of process parameters on the dimensional and geometrical precision of PM steel parts. PhD thesis, University of Trento.

S

Stella, Piergiorgio (2016) Powder metallurgy: investigation of metallurgical and technological aspects and potential applications for critical components of turbomachineries. PhD thesis, University of Trento.

T

Torresani, Elisa (2016) Mechanism of anisotropic shrinkage during sintering of metalli powders. PhD thesis, University of Trento.

V

Vicente, Nerio (2012) Spark Plasma Sintering of Titanium and Cobalt Alloys For Biomedical Applications. PhD thesis, University of Trento.

X

Xing, Sujie (2014) Environmentally friendly baths for Cu-Sn co-electrodeposition: cyanide-free aqueous bath and deep eutectic solvents. PhD thesis, University of Trento.

Z

Zanzarin, Simone (2015) Laser cladding with metallic powders. PhD thesis, University of Trento.

This list was generated on Mon Oct 7 01:30:22 2024 CEST.