Number of items at this level: 80.
29 April 2008
Traina, Matteo (2008) Preparation and properties of micro- and nanocomposites based on high density polyethylene. PhD thesis, University of Trento.
17 April 2009
Cologna, Marco (2009) Advances in the Production of Planar and Micro-Tubular Solid Oxide Fuel Cells. PhD thesis, University of Trento.
Girardi, Fabrizio (2009) Studies on concrete degradation in aggressive environment and development of protective system. PhD thesis, University of Trento.
29 April 2009
Dorigato, Andrea (2009) Viscoelastic and fracture behaviour of polyolefin based nanocomposites. PhD thesis, University of Trento.
21 December 2009
Fedel, Michele (2009) Environmentally friendly hybrid coatings for corrosion protection: silane based pre-treatments and nanostructured waterborne coatings. PhD thesis, University of Trento.
21 January 2010
Karakuscu, Aylin (2010) Synthesis and Characterization of Luminescent Nanostructured SiOC Thin Films. PhD thesis, University of Trento.
Zanella, Caterina (2010) Nanocomposite coatings produced by electrodeposition from additive-free bath: the potential of the ultrasonic vibrations. PhD thesis, University of Trento.
28 January 2010
Tagliazucca, Valeria (2010) Nanostructured hybrid organic/inorganic materials by the nanobuilding blocks (NBB) approach. PhD thesis, University of Trento.
30 April 2010
Contino, Anna Rita (2010) Modification of Anode Microstructure to Improve Redox Stability of Solid Oxide Fuel Cells (SOFCs). PhD thesis, University of Trento.
Dodoo-Arhin, David (2010) Nanostructured Copper Oxides: Production and Applications. PhD thesis, University of Trento.
Zeni, Dario (2010) Cell Sheet Engineering: smart polymers and self-assembled monolayers. PhD thesis, University of Trento.
Zomer Volpato, Fabio (2010) Composites for Biomedical Applications. PhD thesis, University of Trento.
07 April 2011
Ruffo, Giuseppe Alberto (2011) Geometrical features induced in polymer structures by self-assembly and their exploitation for biomedical use. PhD thesis, University of Trento.
29 April 2011
Bendo Demetrio, Ketner (2011) Cryomilling and Spark Plasma Sintering of 2024 Aluminium Alloy. PhD thesis, University of Trento.
De la Torre García, Ricardo (2011) Production of Micro-Tubular Solid Oxide Fuel Cells. PhD thesis, University of Trento.
Enrico, Merzari (2011) Bioreactor Design for Dynamic Process Optimization in Tissue Engineering. PhD thesis, University of Trento.
Geromel Prette, Andre Luiz (2011) Sintering of Co2MnO4 spinel for protective coatings in SOFC. PhD thesis, University of Trento.
13 June 2011
Beyerlein, Kenneth Roy (2011) Simulation and Modeling of the Powder Diffraction Pattern from Nanoparticles: Studying the Effects of Faulting in Small Crystallites. PhD thesis, University of Trento, Georgia Institute of Technology.
02 December 2011
Ortolani, Matteo (2011) Elastic Properties of Textured Nanocrystalline Thin Films. PhD thesis, University of Trento.
Scrinzi, Erica (2011) Service life of organic coatings: strategies for improving aesthetic and protective durability. PhD thesis, University of Trento.
24 April 2012
Dalbosco, Luca (2012) Synthesis, Characterization and Functionalization of Iron Oxide Magnetic Nanoparticles for Diagnostics and Therapy of Tumors. PhD thesis, University of Trento.
Lorandi, Christian (2012) A Smart Solution for Tissue Engineering Applications. PhD thesis, University of Trento.
26 April 2012
Buffa, Marta (2012) Coating for energetic and sensing applications. PhD thesis, University of Trento.
Cristina, Foss (2012) Matrices and strategies for complex tissue regeneration. PhD thesis, University of Trento.
Piccinini, Marzio (2012) Porous calcium phosphate granules for biomedical applications. PhD thesis, University of Trento.
Vicente, Nerio (2012) Spark Plasma Sintering of Titanium and Cobalt Alloys For Biomedical Applications. PhD thesis, University of Trento.
14 November 2012
Leonardi, Alberto (2012) Molecular Dynamics and X-ray Powder Diffraction Simulations: Investigation of nano-polycrystalline microstructure at the atomic scale coupling local structure configurations and X-ray powder Diffraction techniques. PhD thesis, University of Trento.
28 March 2013
Paternoster, Giovanni (2013) Silicon Concentrator Solar Cells: Fabrication, Characterization and Development of Innovative Designs. PhD thesis, University of Trento.
15 April 2013
Gasperini, Luca (2013) Strategies for cells encapsulation and deposition. PhD thesis, University of Trento.
Stoppato, Matteo (2013) Bone Tissue Engineering: structures and strategies for functional scaffold design and evaluation. PhD thesis, University of Trento.
23 April 2013
Arregui Buldain, Amaia (2013) Stability studies of critical components in SOFC technologies. PhD thesis, University of Trento, Ik4-Ikerlan.
24 April 2013
Abdellatief, Mahmoud (2013) Structural Defects in Nanotechnology: Production, Characterization, Applications: Transport Properties in Mechanically Ground Nanocrystalline Ceramics & Hydrogen Storage in Metallic Hydrides. PhD thesis, University of Trento.
Medeiros Araujo, Thiago (2013) Single Polymer Micro- and Nano- Composites. PhD thesis, University of Trento.
29 November 2013
Dabrowska, Izabela (2013) Polyolefin nanocomposite with different types of nanofillers. PhD thesis, University of Trento.
Müller, Melanie (2013) Advances in the modelling of in-situ powder diffraction data. PhD thesis, University of Trento, University of Stuttgart.
10 December 2013
Casarin, Michele (2013) Production and Characterization of Micro-Tubular Solid Oxide Fuel Cells. PhD thesis, University of Trento.
Vallachira Warriam Sasikumar Pradeep, Pradeep (2013) Study of Silicon Oxycarbide(SiOC) as Anode Materials for Li-ion Batteries. PhD thesis, University of Trento.
15 April 2014
Bertolotti, Giulia (2014) Micro-analytical methodologies for the characterization of airborne inorganic pollutants collected on unconventional substrates. PhD thesis, University of Trento.
Buccella, Mauro (2014) Color masterbatches for polyamide 6 fibers. Optimization of compounding and spinning processes. Physical-chemical characterization of industrial products. PhD thesis, University of Trento, Aquafil S.p.A..
De Genua, Francesca (2014) Engineered Alumina / Silicon Carbide Laminated Composites. PhD thesis, University of Trento.
09 October 2014
Ecco, Luiz Gustavo (2014) Waterborne Paint System Based on CeO2 and Polyaniline Nanoparticles for Anticorrosion Protection of Steel. PhD thesis, University of Trento.
Pedrazzoli, Diego (2014) Understanding the effect of nanofillers on the properties of polypropylene and glass fiber/polypropylene multiscale composites. PhD thesis, University of Trento.
Satardekar, Pradnyesh (2014) Materials Development for the Fabrication of Metal-Supported Solid Oxide Fuel Cells by Co-sintering. PhD thesis, University of Trento, Italy.
Xing, Sujie (2014) Environmentally friendly baths for Cu-Sn co-electrodeposition: cyanide-free aqueous bath and deep eutectic solvents. PhD thesis, University of Trento.
15 December 2014
Azzolini, Andrea (2014) Production and performance of Cu-based anode-supported SOFC. PhD thesis, University of Trento.
Gelisio, Luca (2014) Structure and properties of nanostructured materials from atomistic modeling and advanced diffraction methods. PhD thesis, University of Trento.
16 April 2015
Liaudanksaya, Volha (2015) Bottom-up Tissue Engineering:The Effect of 3D Tissue Fabrication Strategies on Cellular Behavior. PhD thesis, University of Trento.
Nguyen, Van Lam (2015) Synthesis and Characterization of Multifunctional Polymer-Derived SiOCN. PhD thesis, University of Trento.
Sasidharan Pillai, Rahul (2015) Synthesis and Characterization of Calcium Phosphate Powders for Biomedical Applications by Plasma Spray Coating. PhD thesis, University of Trento.
30 April 2015
Cataldi, Annalisa (2015) Micro- and Nanostructured Polymeric Materials for art protection and Restoration. PhD thesis, University of Trento.
Cazzolli, Marco (2015) Co-sintering of a metal injection overmolded bi-metallic part. PhD thesis, University of Trento.
Rebuffi, Luca (2015) Advanced Characterization of Nanocrystalline Materials by Synchrotron Radiation Xâray Diffraction. PhD thesis, University of Trento.
22 June 2015
Borovin, Evgeny (2015) NMR Characterization of Sol-Gel derived Hybrid Nanonmaterials: insight on organic-inorganic Interfaces. PhD thesis, University of Trento.
21 September 2015
Floren, Michael (2015) Capturing Complex Microenvironments for Directed Stem Cell Differentiation. PhD thesis, University of Trento, University of Colorado Boulder.
30 November 2015
de Oliveira Botelho, Pedro Augusto (2015) Biodegradable stents made of pure Mg and AZ91 alloy through SPS sintering. PhD thesis, University of Trento.
03 December 2015
Koch, Robert (2015) Modeling diffraction of nanostructured materials: a combined theoretical and experimental study. PhD thesis, University of Trento.
23 February 2016
Khan, Saleem (2016) Towards Merging of Microfabrication and Printing of Si µ-Wires for Flexible Electronics. PhD thesis, University of Trento.
Verma, Piyush Chandra (2016) Automotive Brake Materials: Characterization of Wear Products and Relevant Mechanisms at High Temperature. PhD thesis, University of Trento.
24 March 2016
Stella, Piergiorgio (2016) Powder metallurgy: investigation of metallurgical and technological aspects and potential applications for critical components of turbomachineries. PhD thesis, University of Trento.
15 April 2016
Dalla Palma, Matteo (2016) Polysiloxane based neutron detectors. PhD thesis, University of Trento.
08 June 2016
Bonfanti, Andrea (2016) Low-impact friction materials for brake pads. PhD thesis, University of Trento.
Cozza, Natascia (2016) Marine organisms as sources of materials for instructive scaffolds design. PhD thesis, University of Trento.
Zera, Emanuele (2016) Ceramic aerogels of the Si-C-N-O system from pre-ceramic polymer. PhD thesis, University of Trento.
07 September 2016
D'Angelo Bandres, Renato (2016) Preparation and characterization of Cu2-xZn1+ySnS4 for thin films solar cells. PhD thesis, University of Trento.
25 November 2016
Tinku, Sajina (2016) Micro fabrication technologies for tear fluid sensors for functional contact lens applications. PhD thesis, University of Trento.
06 April 2017
Khan , Hafeez Ullah (2017) Decoration of graphene sheets with metal and metal oxide nanostructures by low-pressure plasma deposition. PhD thesis, University of Trento.
26 April 2017
Biesuz, Mattia (2017) Flash Sintering of Alumina-based Ceramics. PhD thesis, University of Trento.
03 May 2017
Ayana, Dawit Gemechu (2017) Synthesis and characterization of Sol-Gel derived ZnO thin Films for memristive Applications. PhD thesis, University of Trento.
Mahmood, Haroon (2017) Multifunctionality in epoxy/glass fibers composites with graphene interphase. PhD thesis, University of Trento.
29 June 2017
Signetti, Stefano (2017) Computational models for impact mechanics and related protective materials and structures. PhD thesis, University of Trento.
07 September 2017
Deirmina, Faraz (2017) Novel PM Tool Steel with improved hardness and toughness. PhD thesis, University of Trento.
08 November 2017
Campostrini, Matteo (2017) Development of multilayer for protection from intense electric fields. PhD thesis, University of Trento.
14 December 2017
Broseghini, Marica (2017) Modelling of high-energy grinding processes. PhD thesis, University of Trento.
17 May 2018
Frasnelli, Matteo (2018) Calcium Phosphate Powders for Biomedical Applications: Synthesis, Thermal Behavior and Non-Conventional Sintering. PhD thesis, University of Trento.
05 July 2018
Dul, Sithiprumnea (2018) Carbon-based polymer nanocomposites for 3D-printing. PhD thesis, University of Trento.
23 October 2018
Carlomagno , Cristiano (2018) Surface Patterned Ceramics Via Breath Figures Method With Potential Application As Implant Coatings. PhD thesis, University of Trento.
26 March 2019
Federici, Matteo (2019) Study of Wear Mechanisms in Braking Systems with HVOF-Coated Discs. PhD thesis, University of Trento.
06 May 2019
Perez Demydenko, Camilo (2019) Static and dynamic disorder in nanocrystalline materials. PhD thesis, University of Trento.
30 May 2019
Flor, Alberto (2019) Atomic Modelling of Disorder in Metal Nanocrystals. PhD thesis, University of Trento.
04 October 2019
Rigotti, Daniele (2019) Polymer composites for sustainable 3D printing materials. PhD thesis, University of Trento.
This list was generated on Sun Dec 22 01:31:17 2024 CET.
